2381
G-Code, CAD, and CAM discussions / Re: Cirkles in Mach 3 Problem
« on: November 19, 2017, 11:08:20 AM »
Hi Daniel,
In Config. / General Config. change the IJ Mode then regenerate the toolpath.
To avoid this problem all Gcode containing arcs should include the G90.1 or G91.1 as appropriate.
Tweakie.
In Config. / General Config. change the IJ Mode then regenerate the toolpath.
To avoid this problem all Gcode containing arcs should include the G90.1 or G91.1 as appropriate.
Tweakie.