621
General Mach Discussion / Re: Threading cutting Tool path running incorrectly in Mach3 turn Version R3.043.066
« on: March 31, 2017, 08:09:35 AM »
Mark,
In the Simple Threading wizard you can check if you are exceeding your configured feedrate and acceleration and it will give you a warning. Software is rather dumb and what you say it will do or try to!
RICH
In the Simple Threading wizard you can check if you are exceeding your configured feedrate and acceleration and it will give you a warning. Software is rather dumb and what you say it will do or try to!
RICH