Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: TonyPerthWA on November 15, 2016, 11:00:09 PM

Title: Removal of surrounding material
Post by: TonyPerthWA on November 15, 2016, 11:00:09 PM

Complete newbie here. I am almost up to speed with cutting lines however when i think about cutting away the background the only solution i can see is to plot every cut. Is it possible to invert a gcode file so it only cuts away the background thus leaving the subject raised?

Title: Re: Removal of surrounding material
Post by: ger21 on November 15, 2016, 11:12:08 PM

No.
You do this with a CAM program.