Messages

171

CS-Lab / Re: G31/G92 plasma cutter trouble

« on: December 09, 2022, 04:46:17 PM »

Would you post your XML file for me to look at as I can find no real reason why this should happen.

BTW

Did you turn off 'Include TLO in Z from G31' in general config when you had the probe issue?
 

172

Mach4 General Discussion / Re: force screen label to refresh

« on: December 09, 2022, 04:12:29 PM »

Are you wanting to finish a line of g-code?

If its G-code insert a G61 before the line you wish to complete then put a G64 after it :-

G01 X-100. F50.
G61
Y25.
M1005
G64
G01 X0 Y0 F100.

173

General Mach Discussion / Re: MACH4 newb help

« on: December 09, 2022, 03:44:03 PM »

We need a bit more detail about the motion controller you are using with Mach3 and 4

174

CS-Lab / Re: G31/G92 plasma cutter trouble

« on: December 09, 2022, 03:38:15 PM »

That should be good.

When you say it pauses is it for a fixed time or until you press Cycle start?

175

Mach4 Toolbox / Re: Tool Change Script for Mach4 - A collaborative effort for a Tool Setter Macro

« on: December 09, 2022, 03:19:41 PM »

It sounds as if you want a tool setter not a tool change macro.

If you look in the Mach4 Docs folder you will see a Scripting Manual, in here are the basic code for a rack type M6 macro.

If you have a drum or carousel type then all of the complexities of that would need to be added and as every tool changer is different it needs to be custom coded.

Not as simple as asking a few questions.

BTW, manual jogging within a macro is not possible.

176

CS-Lab / Re: G31/G92 plasma cutter trouble

« on: December 09, 2022, 03:02:56 PM »

Have you got a return on the end of the last line?

177

Mach4 General Discussion / Re: Is there an M06 macro with G43 height compensation?

« on: November 30, 2022, 07:30:42 PM »

This may be of some use to you:-

https://www.machsupport.com/forum/index.php?topic=46737.msg294478#msg294478

178

General Mach Discussion / Re: Why has my CNC stopped working? Need help please.

« on: November 30, 2022, 07:23:52 PM »

Have you got the right profile loaded.

179

General Mach Discussion / Re: Mach 3 threading

« on: November 30, 2022, 07:08:53 PM »

I have been doing this for almost 18 years and I can count on one hand the number of thanks I have had. 

180

General Mach Discussion / Re: .dll for IN1 request - MACH3

« on: November 30, 2022, 07:04:38 PM »

You will not get any help here for that product, I suggest you go to the board manufacturer for that detail.