good morning
I would like to insert in the gcode (saved by artcam) the date of creation of the file, example:
(FILE = clock)
date <--------------------------------------------
(MATERIAL MEASUREMENT) (X = 310.000, Y = 380.000, Z = 10.400)
(3,000 mm Flat tool diam.)
%
G90
G49
M3 S15000
G0 X-1.097 Y-10.347 Z3.000
G1 Z-0.936 F1140
.........
I do not know if it is feasible, I ask for help from those who know more than me
the post processor that I use is the following:
;
; Fanuc G - Code 4-Axis rotary post processor
;
; Linear Y Axis is wrapped onto A rotary axis
;
; History
;
; Who When What
; === ======== ========================================
; TM 04/07/95 Written
; BEM 06/08/96 Modified for Rotary Axis support
; BEM 19/06/00 Fixed
; BEM 03/02/00 Added description
; JVG 27/10/03 Modified for Mach2 controller, Wolverine3 or Elite6 machines
; JVG 12/12/03 Modified for Mach2 3axis machining
; JVG Feb 23 05 Small modifications with Bill P
DESCRIPTION = "Mach2 mm(*.txt)"
;
FILE_EXTENSION = "txt"
;
UNITS = MM
;
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = "[13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "(FILE=[FILENAME])"
START = "(MISURA MATERIALE) (X=[XSIZE], Y=[YSIZE], Z=[ZMATERIAL])"
START = " ([TOOLDESC])"
START = "%"
START = "G90"
;START = "G21"
; G20 = Use MM as unit value
START = "G49"
;START = "M6 T1"
; M6T1 = tool change via macros (commented out)
START = "M3 "
;START = "M7"
; M7 = turn misting coolant on (commented out)
;
; Program moves
;
FIRST_RAPID_RATE_MOVE = "G0 [X] [Y] [Z]"
FIRST_FEED_RATE_MOVE = "G1 [X] [Y] [Z] [F]"
FEED_RATE_MOVE = "[X] [Y] [Z]"
;
; End of file
;
END = "G0[ZH]"
END = "[XH][YH]"
END = "M05"
END = "M30"
END = "%"
I sincerely thank those who can help me
regards