Hello Graham Thanks for the reply. I am having a family reunion today through the weekend so I will not get back to the machine until next weekend as I am not retired yet. I will do my best to try and follow instructions as of yet I know that I have no rapids set in Mach because I could not find a decent description on what they do and how to set up. Regarding the g code and single block instruction. The machine has no connection to the internet and the computer only has Mach 3 on it. I use sheetcam on another computer to generate the code. I could copy the G code from sheetcam on a mem stick then somehow post it to this site. Honestly this is the first forum I have ever joined and as a novice unclear on adding code for you to see to my posts.. On another note I see you located in England, I was born in Blackpool and have been in Canada since 1965. Do you know if there is a posting tutorial on the site so I can familiarize my self with adding pictures and code to my posts.
Thankyou for your interest in my issues. I see by your number of posts you have been very involved!