6361
General Mach Discussion / Re: sharp 10.4 screen
« on: November 21, 2011, 11:34:12 AM »
Hi Tony,
I am sure it can be done but it is really a job for an electronics engineer. The necessary signals are available from the PC graphics chip but the signal levels need to be checked prior to connection to the screen, get it wrong and damage to the screen or PC could occur.
In my opinion, in this instance, the risk is too high for 'trial and error' type electronics.
http://pinouts.ru/Video/VGA15_pinout.shtml
Tweakie.
I am sure it can be done but it is really a job for an electronics engineer. The necessary signals are available from the PC graphics chip but the signal levels need to be checked prior to connection to the screen, get it wrong and damage to the screen or PC could occur.
In my opinion, in this instance, the risk is too high for 'trial and error' type electronics.
http://pinouts.ru/Video/VGA15_pinout.shtml
Tweakie.