3461
FAQs / Re: Setting Mach 3 Port to PCI parallel port address
« on: July 24, 2016, 11:23:46 AM »
Unfortunately you cannot use the Parallel Port when running Mach3 under Win8 either.
Also Parallel Port operation with a laptop is not supported.
It's either Win7 (or earlier) for Parallel Port operation or else use an external motion controller (such as the ESS http://www.warp9td.com/ or similar) then you can use your laptop or Win10 etc.
Tweakie.
Also Parallel Port operation with a laptop is not supported.
It's either Win7 (or earlier) for Parallel Port operation or else use an external motion controller (such as the ESS http://www.warp9td.com/ or similar) then you can use your laptop or Win10 etc.
Tweakie.