7001
General Mach Discussion / Re: need help
« on: October 27, 2012, 04:03:47 AM »
Ok your switches are basically suffering from the electronic equivalent of bouncing mechanical switches.
As the machine Coords zero and LEDs turn green that proves Mach has seen the switches close again so Mach is working correctly. I do not know what your switches are like but it could be your axis is unsteady, the trigger is not precise enough or just these type of switches are not suitable for homing correctly.
Hood
As the machine Coords zero and LEDs turn green that proves Mach has seen the switches close again so Mach is working correctly. I do not know what your switches are like but it could be your axis is unsteady, the trigger is not precise enough or just these type of switches are not suitable for homing correctly.
Hood