441
G-Code, CAD, and CAM discussions / Re: Down load Gcode fail
« on: August 24, 2021, 01:50:14 AM »
Its a little quirk in so far as the load file type is stored in your <profile> .xml file which is only updated when Mach3 is shut down.
Set 'File of type' to (*.txt) then load your .txt file. Shutdown then re-open Mach3. It should now be set for loading *.txt files.
(there are probably other ways of doing this but one method is as good as the other)
Tweakie.
Set 'File of type' to (*.txt) then load your .txt file. Shutdown then re-open Mach3. It should now be set for loading *.txt files.
(there are probably other ways of doing this but one method is as good as the other)
Tweakie.