8211
General Mach Discussion / Re: Add Cont-Step-MPG Leds to Cntrl Pnl.
« on: June 08, 2010, 03:30:33 AM »
Hi Johnv,
You need to create a 'set trigger macro' (OEM 301) containing the VB LED detection and output switching code plus DoOemButton(245) to trigger the jog mode toggle. (with a bit of ingenuity you could multiplex two outputs to control three LEDs to save on outputs here) and set your hotkey trigger for pin 13 to 301.
Brian has described the whole process, better than I can, in this thread http://www.machsupport.com/forum/index.php/topic,918.0.html
Tweakie.
You need to create a 'set trigger macro' (OEM 301) containing the VB LED detection and output switching code plus DoOemButton(245) to trigger the jog mode toggle. (with a bit of ingenuity you could multiplex two outputs to control three LEDs to save on outputs here) and set your hotkey trigger for pin 13 to 301.
Brian has described the whole process, better than I can, in this thread http://www.machsupport.com/forum/index.php/topic,918.0.html
Tweakie.