I got the laser install working with simple on / off, but now I want to get PWM functions to work.. I don't completely understand how PWM is supposed to be configured, I followed the instructions on the JTEC site to get it configured, but I do not think it is working right.. as when i enter M3 s1 I am still getting a high powered laser.
For some reason I could only upload 4 screenshots.. so i removed them and put everything in google drive and shared them below..
This is all my setting, that i think are required to enable PWM.. Thanks for the help.. Also in its current state the Laser does turn on / off with the M3 / M5 commands from MDI / gcode, but in gcode i use the M11p and M10p commands to remove the delay..
https://drive.google.com/drive/folders/0B24uz5OgchgLQ0E1T0dla3FPdGM?usp=sharingInstructions from JTEC..
https://jtechphotonics.com/?page_id=1436