Hey Guy's,
Quiet in here! Got a question about the 3 fig's I attached. Just what causes the path to not get cut in the profile. Pullout,Stock Clear. Or the Depth of Cut. Been tring Many Profiles,and different config's and have come to a conclusion that all are the same as when posted with THIS, Tool, I Have Made For My Own Use, That clears all my Machine Clearence problems, One of which I am in the process of Extending the carriage,and Handwheel, to acomadate the profile of the part I want to make. This size is what I want,and I have to make changes in the lathe to do this. What a PAIN, but then,It Look's good, and is worth the upgrade that I am doing. Art said " watch your profiles as there could be problems", and thus so. Not enough X clearence. Just thought I would Share this info for anyone else that is going to find problem's in doing a One Off Profile. Thanks For Looking. Thanks, Hank S.