5451
General Mach Discussion / Re: G31 Probe problem
« on: August 03, 2011, 03:15:17 PM »
I think it was this Version update.
January 29/2009
Release 3.042.021
-- Bug fix to some Arcs feedrate..
-- Installer was missing a file, making a false error message popup
-- CPU usage lowered on Macros that fill Mach3's buffers
-- Macro's can no longer overrun the buffer when adding moves
-- Feedhold fixed to pause motion coming from the script buffer
-- Ismoving() script call no longer will tax the CPU
My other point has always been IF mach3 had condition Gocde most of this would be a moot/mute? point as most would not need the CB side for machine work. You will notice that Fanuc MacroB is a VERY useful macro language for Gcode and it HAS access to all the system parameter/var 's.
Then the CB would be basically for system enhancements. (my opinion (;-) )
(;-) TP
January 29/2009
Release 3.042.021
-- Bug fix to some Arcs feedrate..
-- Installer was missing a file, making a false error message popup
-- CPU usage lowered on Macros that fill Mach3's buffers
-- Macro's can no longer overrun the buffer when adding moves
-- Feedhold fixed to pause motion coming from the script buffer
-- Ismoving() script call no longer will tax the CPU
My other point has always been IF mach3 had condition Gocde most of this would be a moot/mute? point as most would not need the CB side for machine work. You will notice that Fanuc MacroB is a VERY useful macro language for Gcode and it HAS access to all the system parameter/var 's.
Then the CB would be basically for system enhancements. (my opinion (;-) )
(;-) TP