Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: BigZ on April 02, 2008, 08:48:17 PM

Title: Screen 4 Frustration
Post by: BigZ on April 02, 2008, 08:48:17 PM

Trying to modify Greolts screen for a laser edge finder for a camera. Unfortunately can't access the script most of the time when I double click or modify/move the buttons. when I finally can modfiy them parts of the screen are jumbled up and it locks up again. >:(

Liam

Title: Re: Screen 4 Frustration
Post by: Chaoticone on April 02, 2008, 10:36:35 PM

One thing I figured out the hard way is this, set it to a res. that you can see the entire screen. If you can and scroll over to a place the buttons at the other extreme can't be seen, go back and now you can't edit them. Also disable the background image. THere are a couple of videos on it in the tutorial, video tutorials section.

Brett

Title: Re: Screen 4 Frustration
Post by: Greolt on April 03, 2008, 04:29:28 AM

 
;D ;D... Screen4 is like a woman with PMT........You have to tip toe around trying hard not to offend it...... ;D ;D

I use a large screen so have not seen some of the issues with elements jumping out of place when scrolling.

Greg

Title: Re: Screen 4 Frustration
Post by: BigZ on April 03, 2008, 05:38:53 PM

Cheers Brett it was the res causing the problem.

Greg after 4 frustrating hours last night the woman with PMT was about to get the tip of my toe.

All I have to do now is figure how turn the camera plugin on with a button.

Liam