10941
General Mach Discussion / Re: anilam 1100
« on: August 16, 2011, 04:30:49 PM »
The drives will likely be analogue input amplifiers so you would need to use one of the controllers that can output an analogue command voltage. The ones that work with Mach are Galil, DSPMC, Kflop with Kanalog.
Your other option would be to replace the old amps with drives that can accept Step/Dir input, which drives will be suitable will depend on the voltage and current ratings of your motors.
Personally I would do things myself but if you want a complete package then the only people I can think of that may do something suitable is machmotion.com
Hood
Your other option would be to replace the old amps with drives that can accept Step/Dir input, which drives will be suitable will depend on the voltage and current ratings of your motors.
Personally I would do things myself but if you want a complete package then the only people I can think of that may do something suitable is machmotion.com
Hood