14141
General Mach Discussion / Re: Aerotech motion systems
« on: November 09, 2010, 10:42:42 AM »
It is likely the drives will be analogue drives (+-10v input) which is no use for Mach natively, you could use them however with one of the external devices that can accept Step/Dir signals and put out analogue. The devices are Galil, DSPMC and K-Flop(with K-Analog)
If your drives can accept Step/Dir signals then you will be able to use them without using one of these devices but unless they fairly modern it is unlikely.
As for the ISA card then no you wont be able to use that unless you write a plugin for it.
The opto I/O may be of use but will depend what connections it has on it.
Hood
If your drives can accept Step/Dir signals then you will be able to use them without using one of these devices but unless they fairly modern it is unlikely.
As for the ISA card then no you wont be able to use that unless you write a plugin for it.
The opto I/O may be of use but will depend what connections it has on it.
Hood