I am planning on sticking different motors that were listed at the first of this topic onto the AB drives. I have a couple of the motors pinouts that I can work with in connecting the motors up to these drives. I am just not familiar with what to hook up to and where with the AC servo motors.
By the first motors are you meaning the reliance motors? If so then that is a good choice as they are the same as the Allen Bradley Y series motors and should plug right into your drives
First however you need to make sure your drives are big enough, the motors you listed (Reliance electric Y-2012-1-H00AA) will need a DSD-020 drive, if they came with the motors then the chances are they are correct but have a look and make sure.
Do you have the UltraWare software? you need that to set up the drives.
If you have any questions or doubts about these drives and motors please let me know as I am very familiar with the Ultra 3000 drives, I have them on my lathe and the mill I am retrofiiting at the moment.
Hood
Oh and almost forgot the reliance motors you have listed are 115v motors so you only want to feed your drives with 115v. Are you in the USA? If so your mains will be 115v between live and neutral I think.