7721
Show"N"Tell ( Your Machines) / Re: Conect 121 lathe retro
« on: August 28, 2012, 06:09:54 AM »
Even at £200 for a PLC plus ESS of £120 and a BOB of say £120 (for 2 port one) then another single BOB maybe £50 then that would be almost £500 and no 24v or diff on the ESS and no real integration between the lot.
For a machine that you are happy with 5v I/O no differential I/O etc then the ESS is an excellent route. If only the Step/Dir spindle was sorted as the rest of the niggles that the USB SS suffers from have been cured with the ESS.
Hood
For a machine that you are happy with 5v I/O no differential I/O etc then the ESS is an excellent route. If only the Step/Dir spindle was sorted as the rest of the niggles that the USB SS suffers from have been cured with the ESS.
Hood