17676
« on: October 26, 2009, 07:38:26 AM »
The reset is because you have noise or your switch is bouncing, what is happening is you home and Mach sees the home switch trigger, backs off the switch but it bounces. Mach sees the switch turn off so says its at home but because of the bounce or noise it comes back on for a second and then Mach sees that as a limit being hit and stops everything.
The jogging could also be related as when Mach sees a limit being hit it will only allow you to jog slowly just in case you jog the wrong way, if you stop jogging then start again it should now be at full jog speed.
One other thing it could be with the jog is that you have a slow jog set, if you press the Shift key and then Jog that will move at full jog speed.
To get over your noise/bounce problem try setting the Debounce interval up a bit, try at 2000 and then progressively lower until it again becomes a problem then bump up slightly. You will find the Debounce Interval on General Config page at the top right.
Hood