Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: francopuk on August 02, 2006, 05:41:54 AM
-
hi all, i have problem with dwell G4, i have create this G-CODE
G90 F150
G0 Z1
G1 X15 Y25
M3
G1 Z-1
G4 P2.0 (OR G4 P2)
G1 Y10
G0 Z5 M5
M30
this mach3 ignore the G4 ..... line
any help
Franco
-
Try :-
G4 P2000
Graham.
-
Try changing to p2.0 to p200 You may have the dwell set to usec.. It is working here..
-
thank to all..... the time of dwell is in millisecond....
Franco