9251
SmoothStepper USB / Re: Smooth Stepper and MPG Pendant
« on: February 28, 2012, 11:42:07 AM »
The just go to Config menu then Ports and Pins then MPG/Encoder page and set up MPG1 to the port 3 for A and B and set the pins you have connected A and B to. After that do the calibration as mentioned.
For other ones you would be best to use a Brain to look at the inputs you are using and to write to DROs or press buttons depending on what you want. You will need to set them up in ports and pins as OEM triggers or Inputs so you can let the Brain know where to look.
Hood
For other ones you would be best to use a Brain to look at the inputs you are using and to write to DROs or press buttons depending on what you want. You will need to set them up in ports and pins as OEM triggers or Inputs so you can let the Brain know where to look.
Hood