I am retrofitting a router with a G100 and Mach3. Everything works well except for the following. I have the X-- limit and the X Home set up with a single limit switch, the Y-- and the Y-Home set up with a single limit switch, and separate X++ and Y++ Limit switches. When I home the machine without the limit switches for X-- and Y-- enabled, the machine homes as it should. If I enable the limit functions for X-- and Y--, when I home the machine the limits are activated and the machine will not home once the limit switches are activated. Further, when I go to either the X++ or the Y++ limits, the machine will not jog back in the negative direction until I go in and deactivate the limit switches. I am also able to jog past the soft limits that I have set up. I have searched the forums, the docs, and the groups and I don't seem to be able to find any reference to this problem. I know that I am missing something, but a hint in the right direction would be helpful. Thanks
Dan