I have a problem routing my project in the center of my material, some of the project is on the material and part is totally off the material. When i do a reference all in machine coordinates it works perfectly, then i switch to work coordinates jog to where i want work 0,0 bring down the z axis to touch the material and zero the x,y and z axis, then do a regen toolpath. When i hit cycle start there is loud binding sound x and z move to where they are suppose to move but y axis lags behind. When i went into the settings tab and ran the set steps per unit test the x and z responded correct, but when i did the y axis i entered to move one inch it moved only a quater inch and that loud binding noise was there. When i use the arrow keys on the keyboard all axis move smoothly. What the heck is going on?
RON HESS