Hi,
I’m having a very frustrating problem with my CNC 3020.
I’m trying to make a circular pocket, but the X axis keeps drifting off to the left.
When I start the operation, which has a .125” depth increment, the pocket will not be centered, going layer to layer.
It seems like this is happening on one particular side of the piece of wood I’m using.
I’m using an 1/8” cutting bit on bamboo.
I’ve re calibrated all axis in mach 3 multiple times to make sure that its traveling the correct distance before hand.
But when I start the operation, it doesn’t cut the hole precisely, and when I hit “Go To Zero, the zero is always off on the x axis.
Any ideas?
Thanks