3181
General Mach Discussion / Re: Circle accuracy problem
« on: February 05, 2014, 11:45:56 AM »
Às said on BobCAD I can not understand why anything is different if you are using the same tool number, same feeds and speeds etc.
I could see deflection being an issue is you were using different feeds or speeds.
The BobCAD code and Mach Wizard code are producing the same rad for the finish or at least they should be, I never saw your Mach code but I did produce some for comparison using your settings.
If you attach your xml and your tools3.dat (in the macro folder of your profile) I can have a look.
Hood
I could see deflection being an issue is you were using different feeds or speeds.
The BobCAD code and Mach Wizard code are producing the same rad for the finish or at least they should be, I never saw your Mach code but I did produce some for comparison using your settings.
If you attach your xml and your tools3.dat (in the macro folder of your profile) I can have a look.
Hood