0 Members and 1 Guest are viewing this topic.
Hello, which program you use that it have exstansion *.nc.There are many programs that produce gcode with the *.NC extension. The file itself, is actually a text file (and can be opened and edited using MS Notepad). The default gcode extension of files in Mach3 is *.tap Although it too, can load and run text files, as long as the gcode they contain is in the correct format. I use MeshCAM Art to produce the gcode for 3D carvings (which outputs the files as *.NC) this makes it easy to distinguish which files are 3D sculptures (*.NC), or simple cut-out programs (*.TAP). Hope this helps you in understanding the differences.Thank you for answer.Best regards, G