G10 has some relationship to machine coordinates that I don't understand.
The code below should change the xyz values all in relation to G54, Correct?
I'm confused by this persistence that changes values in unpredictable ways.
The offset table reflects these and I can't get them to clear.
Thanks for any help.
Tom
G0 G90 G54 G17 G40 G49 G50 G69 G80
M98 P0002 l1 ( Offset setter for Series J )
(P numbers - 2,J 3,C 4,G 5,K 6,A 7,B )
M30
O0002
( Offset setter for Series J )
G54
G10 L2 P1 X0.0 Y0.0 Z0.0 (G54 - Centered on center of hinge holder)
G10 L2 P2 X-0.288 Y0.0 Z0.0 (G55 - Centered on Brand text line)
G10 L2 P3 X0.432 Y0.0 Z0.0 (G56 - Centered on Bottom text line)
G10 L2 P4 X0.694 Y0.0 Z0.0 (G57 - Centered on Top text line)
G10 L2 P5 X0.562 Y0.0 Z0.0 (G58 - Centered on Graphic field)
M99