Hi,
re-locate the home switches and this local fellow will help us get on the standard track. Thank you so much for all the valuable info. It does make more sense now.
Kool. You do not not have to change the Home switches though, they can stay where they are.
Lets say you leave the switches alone and you retain the fact that the machine drives to the lower right hand corner of its travel. When it gets there you'd normally
say 'You are Home', ie the machine coordinates would be set to 0,0,0. But if you want to call the lower left hand corner Home then you'd say 'You are at 0,450,0' and
the machine would set the machine coordinates to 0,450,0. (I am assuming 450mm is the Y axis extent) So if you now said <GoTo Work Zero> it would drive 450mm
to the left and stop at your nominal Home location, ie the lower left hand corner despite it being homed to the lower righthand corner.
The Home switches define one particular location in your machines envelope, and so long as that location is precisely and repeatably defined it does not matter where it is.
You can declare home to be so many mm in that direction and so many mm in that direction from that unique location, and call that Home. The settings to make it so are
the Homing Offsets on the Homing tab of the Control Plugin.
Craig