22691
General Mach Discussion / Re: m03 not turning on spindle. Spindle screen button does
« on: July 12, 2008, 05:40:39 PM »
Dont have spindle controlled on my Mill from Mach so dont use it and on my Lathe I use a custom Macro for the spindle.
Have you tried doing an M3 S1000 to see if that works. If that doesnt work then have a look in the macro folder for the profile you use and see what the M3 adn also the Spindle speed Macros say.
Hood
Have you tried doing an M3 S1000 to see if that works. If that doesnt work then have a look in the macro folder for the profile you use and see what the M3 adn also the Spindle speed Macros say.
Hood