4511
VB and the development of wizards / Re: Calculating workpiece angle through probing? (Missing arcus functions)
« on: November 28, 2014, 08:16:52 AM »
Hi Max,
This is what I use b = Atn(X1pos/Y1pos)*(180/(4*Atn(1))) but you have to be prepared to change the sign if moving into different quadrants.
This thread may be of interest http://www.machsupport.com/forum/index.php/topic,22932.0.html
Tweakie.
This is what I use b = Atn(X1pos/Y1pos)*(180/(4*Atn(1))) but you have to be prepared to change the sign if moving into different quadrants.
This thread may be of interest http://www.machsupport.com/forum/index.php/topic,22932.0.html
Tweakie.