1
Mach4 General Discussion / Re: MACH4 Vcarve ESS z axis crashing into wood
« on: December 15, 2023, 05:42:25 PM »
So it is working now.
Has to be something with vcarve and how it creates the gcode for the v-carve tool without a clearance bit. I added a clearance bit and it now works. I thought I could crate a star with a clearance bit and just increase the depth so the v-bit would do all the work. But vcarve does not like that.
Has to be something with vcarve and how it creates the gcode for the v-carve tool without a clearance bit. I added a clearance bit and it now works. I thought I could crate a star with a clearance bit and just increase the depth so the v-bit would do all the work. But vcarve does not like that.