Messages

3361

General Mach Discussion / Re: Using mach pulse engine (driver) with external programs

« on: March 22, 2006, 04:55:06 PM »

No... it is nolonger an OCX...

3362

General Mach Discussion / Re: Using mach pulse engine (driver) with external programs

« on: March 22, 2006, 06:49:50 AM »

I you could load a gcode file for Mach to run... and I think there is a way to get Mach to run the file. I have not done this so it is only I think

3363

General Mach Discussion / Re: CNC4PC Boards

« on: March 22, 2006, 05:30:22 AM »

I have not used them but there are people that have them running in there machines... So you know you are not the first one

3364

General Mach Discussion / Re: Where are work offsets saved?

« on: March 21, 2006, 03:25:28 PM »

Do you have them set to save or to Zero on startup? it is under Config/State...

3365

General Mach Discussion / Re: Mach3 via USB?

« on: March 21, 2006, 09:46:13 AM »

I used the PCMCIA card the sort-of worked...

3366

General Mach Discussion / Re: Mach3 via USB?

« on: March 21, 2006, 02:48:08 AM »

Greg they work but no that well... I had one running and it would jog the motor but when you ran code it would not run right.

3367

General Mach Discussion / Re: help with tangential knife please

« on: March 20, 2006, 07:08:00 PM »

I don't have a machine that will run this... I am in hopes that I will have a test machine in up and running in the next few months.

sorry about that

Brian

3368

General Mach Discussion / Re: Mach3 and mill set up

« on: March 20, 2006, 07:05:47 PM »

I don't know what you have for a machine but you have to think that the Tool moves and the Table is NOT moving! If you would like to setup the axis just run a test program and see if the axis is inverted...
To change the homing direction there is a Home Neg. check box.

Hope that is a little help
Brian

3369

LazyCam (Beta) / Re: LCAM ????

« on: March 20, 2006, 04:39:24 PM »

I will have a look at it ...

3370

General Mach Discussion / Re: I gotta be missing something so obvious it's embarrasing!!!! HELP

« on: March 20, 2006, 02:26:30 PM »

In Mach3 go to the screen with the fancy new button. Then go to Config/Edit Button Script and then you have to click on the button that you would like to change.

Hope that helps
Brian