Hmmm... now a slightly separate issue... The code works great, I also added a polling routine to my macro pump that watches for any outputs in an "on" state and it lights up an LED button for me if it sees anything.
On the BOB itself, I can also see that on each of my 16 outputs te "activity light" responds whenever I press the software buttons I made... Furthermore, I put a mutimeter on a couple of the pins and sure enough when I hit my software button I get ~12VDC out! Which is exactly what I wanted BUT....
I hooked up the 12VDC relay coil to it and clicked my software button and no-go. I thought maybe I had a bad relay so I swapped it out, same story. The coils require 75mA at 12VDC to fire, and my BOB is supposedly rated to output 100mA, so I shouldn't have a current problem...