2731
General Mach Discussion / Re: backlash on Z axis
« on: April 08, 2012, 07:55:23 AM »
Eliminate the backlash then you won't have a problem and you will be a much happier camper.
How is the Z movement done on the mill?
I solved my problem by raising and lowering the quill using a ball screw. Now hold a 1/2 thou.
RICH
How is the Z movement done on the mill?
I solved my problem by raising and lowering the quill using a ball screw. Now hold a 1/2 thou.
RICH