16670
« on: January 31, 2010, 08:46:41 AM »
I think it has to do with Safe Z as Ger says but also with the way the M6End macro is set up. I think if you have a safe Z as work coords it screws things up, changing to Machine coords for safe Z will cure it. If you wish to keep safe Z at work coords then editing the M6End macro will also cure it.
This is all from memory as Dan13 had that problem a few years back and we worked out what was happening, so maybe he will remember the correct procedure if my memory is playing up and what I said above was incorroect.
Hood