531
General Mach Discussion / Re: Macros
« on: August 04, 2016, 06:08:27 PM »
First thing is the macro needs to be in the folder named after the profile you are using which is in the macro folder, so for example if you use the default Mach3Mill profile then it would be placed in the Mach3Mill folder which is in the Macro folder.
Ok so the macro, you really want to name 101.m1s or above, then when you call that m101 (or whatever) from your code or call from MDI it should run. If it doesn't then most likely the macro is not in the correct folder or possibly there is a syntax error in it, with the latter you should see an error message in the ticker window.
Hood
Ok so the macro, you really want to name 101.m1s or above, then when you call that m101 (or whatever) from your code or call from MDI it should run. If it doesn't then most likely the macro is not in the correct folder or possibly there is a syntax error in it, with the latter you should see an error message in the ticker window.
Hood