8251
General Mach Discussion / Re: PWM Mach Settings
« on: May 16, 2010, 12:55:12 PM »
Hi Dave,
I didn't get reliable results here (just a bench test) with a base frequency of 50 but at 100 I was able to change the mark/space ratio of the PWM signal from around 1% to 99% with the spindle speed slider.
Tweakie.
I didn't get reliable results here (just a bench test) with a base frequency of 50 but at 100 I was able to change the mark/space ratio of the PWM signal from around 1% to 99% with the spindle speed slider.
Tweakie.