I bought this board here
http://www.ebay.com/itm/200763845425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 and am having some problems trying to set it up to work with mach3 2.0 I have some pictures of all what i have so far. I have X Axis and Z Axis motors turning forward and reverse and stalling sometimes but no Y Axis turning. X Axis and Z Axis Motors also seem to be locked up when you start Mach3 you can't turn the shaft by hand but you can turn the Y Axis motor. Also the X Axis and the Z Axis motors seem to be getting hot when they are not running any code and just sitting there. What is causing the motors to overheat and why does the Y Axis not move? I have more pictures but it won't let me post more than 4. Why is that more problems now not enough with what I have to do?