The Y and Z axis are Homing ok now but the X axis was Homing in the wrong direction
So I went to the Motor Home/Soft Limits and un ticked the Home Negative like the Z axis
I wonder why the X axis was Homing in the wrong direction
Also on the same screen I have set the Slow Zone to 2.00 and the Speed % to 20. I understand that the Slow Zone means when the axis approaches the 2.00 the speed will be reduced to 20% until she hits Home. But this does not happen, no matter where the axes are when I Ref Home they start moving to Home at the 20% speed. What I do wrong?