61
Mach4 General Discussion / Re: Mach4 Post Processor Fusion360 Editing to move Z to safe 1st
« on: December 07, 2022, 01:38:20 PM »
G91 G28 Z0. will move to what the machine thinks is 0.00. Again... what the MACHINE Z 0.00 position is.
If you don't have home switches to reference your machine, then you need to select the "No" option on safe retracts in the post properties.
The G43 Z15. H8 applies the tool offset to tool 8 and then moves to the Work Coordinate Position Z 15.00. So whatever work offset you are in, it will move to Z 15.00 with the tool height offset applied.
If you don't have home switches to reference your machine, then you need to select the "No" option on safe retracts in the post properties.
The G43 Z15. H8 applies the tool offset to tool 8 and then moves to the Work Coordinate Position Z 15.00. So whatever work offset you are in, it will move to Z 15.00 with the tool height offset applied.