6201
G-Code, CAD, and CAM discussions / Re: HELP toolofset, G42
« on: December 02, 2010, 10:34:30 AM »
It appears your CAM is NOT using tool offsets when it post the Gcode.
There are no g41/42/40's anywhere in the code. these are the codes that actually DO the offsetting in Gcode.
Some Cams do not USE tool offsets but do the offsetting by offsetting the drawing size to accomendate the tool diameter.
Just a thought, (;-) TP
There are no g41/42/40's anywhere in the code. these are the codes that actually DO the offsetting in Gcode.
Some Cams do not USE tool offsets but do the offsetting by offsetting the drawing size to accomendate the tool diameter.
Just a thought, (;-) TP