1251
General Mach Discussion / Re: Problem´s with cnc milling
« on: June 19, 2015, 07:19:44 AM »
TAKASHI,
Make sure your steps per units and working units are correct and that you are not scaling in Mach3.
You may want to remark how much the measurements are off.
Do something simple to test your machine movements before using more complex software so we can help with the problem.
RICH
Make sure your steps per units and working units are correct and that you are not scaling in Mach3.
You may want to remark how much the measurements are off.
Do something simple to test your machine movements before using more complex software so we can help with the problem.
RICH