4
« on: April 30, 2014, 10:41:23 AM »
Hi guys, so I'm getting to grips with my new RoutOut CNC and I was wondering if you guys could help. I'm hoping I ask the questions in the correct order!
First off, the machine co-ords reset everytime I turn Mach3 off, is there any way for the software to stick with the same co-ords? The machine won't be moved unless Mach3 is on and running.
When the machine hits a physical limit Mach3 thinks it is still moving and so the co-ords keep going. I'm guessing this is cured by soft limits?
We're going to be using a jig to repetitively produce high volumes of machined plastic plates. For example we're machining 5 different plates, 100 of each and then in 6 months time will do similar amounts again (different designs to previous) for this size of plate. So I for speed I need to set the job zero off of the machine co-ords that I establish.
Lastly, how do I send the machine to 0,0,0? How do I send it to specific co-ords?