Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: RONALD COOL on September 16, 2019, 08:06:36 PM
-
My machine runs great hooked up limit switches and when I click ref all home in mach 3 the machine will move to location but very slow that you cant even see it moving not sure what todo motor home/soft limits speed is at 20 percent I was told that this is like 45 inch a minute and should be good steps per is 12800,velocity 199.98 ,acceleration ins/mm sec is 4 ,g's 0.0103607 ,step pulse 5, dir pulse 5
any help would be great I also have a mx4660 on this machine my other machine works fine with same motor type nema 23 only different is the driver board