Yeah, that seriously took me by surprise! I had someone working for me while I was doing a lot of travelling. Being leery of internet purchases (this was a whhhhiiilllleee ago), I would only use a card connected directly to an account that I'd keep relatively small amounts of money in, so - on the off/paranoid-chance - someone accessed the account my liability would be minor (this was at a point where I was dealing w fairly large amounts being deposited/saved in my primary account, so - to repeat - I'd get paranoid, since large amounts of money were/are totally foreign concepts to me). Long story short, I think this kid was supposed to have deposited cash into the small account, or at least he was supposed to, but instead pocketed the cash and installed the pirated version. Probably apparent from my previous posts but computer literate I ain't, hence putting off updating the software/discovering this problem. Needless to say, I went ahead and got a legitimate license straight after Hood explained the issue (for which I'm absolutely grateful), and Scott from Artsoft was kind enough to expedite my order so I've now (literally) gotten the new/real version up and running.
But....
I'm still experiencing the same or similar issues that I described before. I'm making it past the demo cut-off point, but the scale of the image Is miniscule compared to the dims set in the cam file. Again, I'm running the exact configuration I'd set-up on the bogus version, so I'm still unclear on what the issue is. From everything that I can tell, w my admittedly limited grasp on mach, everything's setup as it should be. But here I am, stuck w the same (though very slightly updated) version of my original issue. Again, any help from anyone would be tremendously appreciated. Thanks in advance