22271
Show"N"Tell ( Your Machines) / Re: Warco VMc /Chester 626 knee mill CNC conversion
« on: August 08, 2008, 07:50:58 AM »
If you do screw up you have another option to cut another keyway further round, not ideal but wont make too much difference to the strength of the pulley. I often have to do this on the pulleys etc for the boats as the keyways have been damaged.
Another option would be to cut an ovesize keyway to straighten it up then machine a step key to suit.
Obviously the best option is to take care when you do cut it but just thought I would mention the above as it may help you in the future if you need to repair a pulley with a damaged keyway.
Hood
Another option would be to cut an ovesize keyway to straighten it up then machine a step key to suit.
Obviously the best option is to take care when you do cut it but just thought I would mention the above as it may help you in the future if you need to repair a pulley with a damaged keyway.
Hood