I cut two parts flawlessly. I just started the next part and on the 4th toolpath, a pocketing operation, I noticed that the depth didn't seem correct. I went to look and see what was happening when I saw the machine return to make another pass and then.... I saw the machine travel in the x direction, stop, pause, the DRO on the x axis changed and the tool position is off. Here we go again!
Everything was working great. I did notice that there were a few differences between my previous Mach and the new install. One thing is the ATZ actually follows the code, before the tool height we be some random height about the material, now it is always 1.000. Also it seems like when you push Cycle Start the machine moves and then pauses (I have a 7 second delay), before I think it paused then moved. Oh well, I still need to get this sorted out. The parts I'm running now have about a 3 1/2 hour cycle time. I can't be having problems with these.