Messages

2961

General Mach Discussion / Re: The Forums really work!!

« on: May 20, 2006, 10:14:05 PM »

Also you can use a PLC to run the toolchanger. Mach can talk to the toolchanger over modbus

Hope that helps
Brian

2962

General Mach Discussion / Re: Win2000 Installation Problem

« on: May 20, 2006, 10:08:20 PM »

Do you have a desktop computer? Mach3 and laptops don't play well I will have Art look at this thread and see what he thinks.
Sorry
Brian

2963

Show"N"Tell ( Your Machines) / Re: Pics of my Plasma table

« on: May 19, 2006, 11:59:05 PM »

Good looking rig! Have you made any fire on it? Look to clean 

Keep up the good work and thank you for the pic!
Brian

2964

General Mach Discussion / Re: The Forums really work!!

« on: May 19, 2006, 11:55:15 PM »

Great! I hope you found us to be a very positive group! We all work hard to help out all we can. BIG Thank you to everyone!   

2965

General Mach Discussion / Re: How do I swap the cursor keys for x and y axis?

« on: May 19, 2006, 11:53:23 PM »

Check to be sure that you don't have your axis set to run in the reverse direction of what it should be...

Thank you
Brian

2966

General Mach Discussion / Re: MPG mode - how to set???

« on: May 19, 2006, 11:51:39 PM »

Brian
I think you are MUCH better off to be running Mach 3 at this point   There are many things in Mach3 that BLOW Mach 2 out of the water

If you have any trouble I am here to help!
Brian

2967

General Mach Discussion / Re: Win2000 Installation Problem

« on: May 19, 2006, 11:47:56 PM »

Please try this:

http://www.machsupport.com/optimisation%20XP.txt

Hope that helps
Brian

2968

General Mach Discussion / Re: Cant find any import commands in Mach3

« on: May 19, 2006, 11:43:04 PM »

There will be video's on Lazy Cam but it is going to be after I do a few bug fixes.... Art and I are going to each do a video, This should help you get you the point where you can run Lcam.

Thank you and sorry for the trouble
Brian

2969

Mach3 and G-Rex / Re: Name change for Mach 4

« on: May 18, 2006, 07:19:24 AM »

The name is MachIV   Industrial Version 

2970

LazyCam (Beta) / Re: Lazy Cam?

« on: May 18, 2006, 07:17:23 AM »

I a sorry about that... Lcam is going to be a good program but you all  are helping us get the bugs out  So in time you will see it get better and better. I will be working on Lcam for the next few weeks after I get back from the workshop. Thank you and hang in there we will have something that you like in the end!