ok,
Here is a new screen shot, with the Green, yellow and red colors muted down on the buttons. BUT!! the LEDs are still in the primary colors, there is just to many of them for me to waste a massive amount of time on, they are small, and if their colors really bug you, make them smaller or make your own LEDs. I used simple Priamary Red, Yellow and Green for the LEDs. The Boarder-button LEDs I muted those down since they are larger and thus grab more attention. I also changed the Labels backgrounds to the light gray, so that the Radius/Diameter mode label and others would blend in better, and the PNG buttons would not "Stick out".
Please note: Not complaining, there are just far to many dual state LEDs I would have to completely redo to tone down thier primary colors...... and since they can be made smaller, it is just not worth the time to me........ BUT!! If you ("inset your name here"), want to redo all the indicator LEDs (the small square ones), let me know, and I will send you the list, and the Real Draw pro file, and you can then go and tone them all down by redoing them all.
I have purposely left room in the screen's various areas, so that users have some space to put their own buttons, leds, dros etc.
At this point at least from my perspective, the Run Screen (Hobby/Home wiz-bang version), is done.
Phil: If you or anyone else that may have all the Turn Wizard bmps from the wizard launch page, please send them to me.
Then next page is now on the chopping block: The MDI page........ so, if you want to chime in on what you want to see on this page, AND, do you want this page to also be a "Set-Up Page".
ODD NOTE:
Perhaps someone can shed some light on this: Of all the Image buttons, the "Load File" button shows strange, I have redone it several times in several common formats.
Here is what happens, the first time you press the Load file button, it sinks in (like you pressed it), but it does NOT un-sink!!! it says krinkled up. I am designing this screen in Klauses Mach screen (latest version). Standard buttons for the Load button func, does not show this behavior only the Image buttons, and ONLY for the Load File function........
Scott